Teltonika RUT500


3G (21Mbps/5.76Mbps) router with WiFi and 4x Ethernet ports

  • SMS
  • Ethernet
  • WiFi
  • 3G
  • Power over Ethernet (not compliant with IEEE 802.3af - 2003)
  • 3x LAN 10/100Mbps Ethernet ports
  • 1x SIM Card
  • Backup WAN
  • Ping reboot
  • Wireless AP
  • Bridge mode

Compare products
(Compare 2 or up to 4 products)

Product Description

RUT500 is compact HSPA+ 3G router with high speed wireless and Ethernet connections Internal HSPA+ modem can reach download rate of up to 21 Mbps.
Router support latest IEEE802.11n and IEEE802.11b/g WLAN standards and provide wireless receiving and transmitting rate up to 150 Mbps.

RUT500 Package

Standard package contains

  • Router RUT500
  • Euro PSU
  • 3G antenna (swivel, SMA male)
  • WiFi antenna (swivel, RP-SMA male)
  • Ethernet cable (1.5 m)
  • QSG (Quick Start Guide)
  • Packaging box

  • 3G – Up to 21 Mbps i 3G is the third generation of wireless mobile telecommunications technology.
  • 2G – Up to 296 kbps i 2G is the second generation of wireless mobile telecommunication technology.
  • WiFi – Up to 150 Mbps i Wi-Fi is a technology that allows electronic devices to connect to a wireless with 2.4GHz radio frequency signal
  • Ethernet – 4 ports i Ethernet is widely used local area network (LAN) technology for interconnecting computers in a limited area such as a home, school, computer laboratory or office building.
  • SMS i Short Message Service (SMS) is a text messaging service component.

  • 1x SIM Card i Allows to put 1 SIM card for internet connection
  • 3x LAN 10/100Mbps Ethernet ports i Device can host a network up to three wired networking devices. Ethernet ports speed is 100 megabits per second.
  • 1x WAN 10/100Mbps Ethernet ports i WAN port is used to connect to an internet source. Ethernet port speed is 100 megabit per second.
  • IEEE 802.11b/g/n WiFi standards i Standarts for WiFi technology: 802.11b - 11 Mbps standard, 2.4 GHz signaling; 802.11g - 54 Mbps standard, 2.4 GHz signaling; 802.11n - 100+ Mbps standard improvements over 802.11g
  • Durable aluminum housing i Device housing is made from aluminum material
  • 2 pin industrial DC power socket i Power connector with 2 pins (Power, Ground)
  • Power over Ethernet (not compliant with IEEE 802.3af - 2003) i Device can be powered over Ethernet port but it is not compliant with IEEE 802.3af-2003 standard. Powering device from IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of PoE standard.
  • Mobile antenna type – 2 x SMA
  • WiFi antenna type – 1 x RP-SMA
  • Input voltage range – 7-30 VDC
  • Operating temperature range – 0º to 50º C
  • Storage temperature range – -20º to 70º C
  • Power consumption – < 7W
  • Mounting options – DIN Rail
  • LED indication – 4x LAN status, 1x Power, 1x GSM

  • Bridge mode i Bridge mode lets end device to connect dirrectly to operator and receive IP address from it
  • Automatic and manual operator selection i Device can select network operator automaticly and manually
  • Static routes i Static routes can be configured on device
  • PPPoE i Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the internet through a common broadband medium, such as DSL line, wireless device or cable modem.
  • NTP i Device internal clock can be sinchronized via internet with NTP (Network Time Protocol)
  • Wireless Hotspot i Device has Wireless Hotspot. Wireless hotspot is more advanced version of Wireless Access Point with more customizability
  • Wireless Client i Device can connect to another Access Point as a client (Wi-Fi WAN)
  • Wireless AP i Device can work as a wireless access point
  • Ping reboot i Device can take appropriate action if it cannot ping specific IP address
  • Real-time graphs i Device can display realtime graphs, e.g. signal strength, connection count
  • Backup WAN i Backup WAN feature allows device to swtich to secondary internet source if primary one fails
  • Mobile Traffic counter i Device can display mobile traffic usage information
  • Configuration backup/restore i Device configuration can be saved to file and uploaded to same or other routers
  • VRRP i Virtual Router Redundancy Protocol - an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address.
  • IPsec i The IPsec protocol client enables the router to establish a secure connection to an IPsec peer via the Internet
  • GRE Tunnel i GRE (Generic Routing Encapsulation RFC2784) is a solution for tunneling RFC1812 private address-space traffic over an intermediate TCP/IP network such as the Internet. GRE tunneling does not use encryption it simply encapsulates data and sends it over the WAN.
  • OpenVPN i OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange.
  • SNMP i Simple Network Management Protocol - a set of protocols for managing complex networks. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network.
  • Send/receive SMS i Device can send and receive SMS messages
  • Status via SMS i Device status information can be received from device via SMS message
  • SMS reboot i Device can be restarted via SMS
  • Mobile enable/disable via SMS i Device's mobile connection (3G/4G) can be enabled or disabled via SMS message
  • Wireless enable/disable via SMS i Wireless device adapter can be controlled remotely via SMS
  • Web Filter i Device can block specific host names or only allow users to access host names from the white list.
  • Mobile on Demand i Device can disconnect it's data connection after specified amount of time of inactivity. (Only use data when it is needed)
  • Mobile Data Limit i Device can stop providing internet access if mobile data limit is reached.
  • Configuration Profiles i Device can have several profiles with different configuration
  • QoS i Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications, online gaming, Ethernet LAN ports, or specified MAC addresses to minimize the impact of busy bandwidth
  • Firewall i Device has configurable firewall (Port forwarding, traffic rules)
  • IP/MAC filter i Device can block devices with certain MAC addresses or allow connect only those devices, which MAC addresses are in the MAC list
  • DHCP server i The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to assign IP addresses and provide configuration information to devices such as servers, desktops, or mobile devices, so they can communicate on a network using the Internet Protocol (IP)
  • Dynamic DNS i Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to static hostname.

Key Features

  • HSPA+ up to 21 Mbps DL and 5.76 Mbps UL
  • Quadband UMTS and GSM
  • Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b wireless standards
  • Complies with IEEE 802.3 and IEEE 802.3u standards
  • Four Ethernet ports
  • Durable aluminum housing
  • Integrated OpenVPN and Dynamic DNS
  • External antennas
  • 3G backup WAN function
  • SMS reboot function
  • DIN rail mounting (optional)
  • 2-pin terminal block power connector (optional)


This product partly contains open source software. For more information please click here.