All product features

Features list of all Teltonika devices.

Technology features

2G

2G is the second generation of wireless mobile telecommunication technology.

3G 3G

3G is the third generation of wireless mobile telecommunications technology.

4G (LTE) 4G (LTE)

Long-Term Evolution (LTE) is a standard for high-speed wireless communication for mobile phones and data terminals.

AES-128 encyption AES-128 encyption

The Advanced Encryption Standard (AES) is a specification for the encryption of electronic data.

Bluetooth Bluetooth

Bluetooth is a wireless technology standard for exchanging data over short distances.

Ethernet Ethernet

Ethernet is widely used local area network (LAN) technology for interconnecting computers in a limited area such as a home, school, computer laboratory or office building.

GNSS GNSS

Global positiong system/Global Navigation Satellite System.

GPRS GPRS

General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.

LAN LAN

RF RF

Radio frequency

SMS SMS

Short Message Service (SMS) is a text messaging service component.

WiFi WiFi

Wi-Fi is a technology that allows electronic devices to connect to a wireless with 2.4GHz radio frequency signal

WiMAX WiMAX

It is a broadband wireless data communications technology based around the IEEE 802.16 standard providing high speed data over a wide area.

Rrp features

1+ pcs.

10+ pcs.

100+ pcs.

Hardware features

0 - 24V analog input

Analog input is designed to measure analog voltages in the range of 0-24V and convert it to digital domain.

0 - 30V digital galvanically isolated input

Digital input with galvanic isolation

0 - 3V digital input

Digital non-isolated input for passive sensors

1-Wire® 1-Wire®

1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.

10 - 16V

External voltage range

10 - 30V

External voltage range

10/100Mbps Ethernet port 10/100Mbps Ethernet port

Device has one wired network connector. Ethernet port speed is 100 megabits per second.

16MB memory 16MB memory

Internal memory for records storing when there is no GPRS connectivity.

1MB memory

Internal memory for records storing when there is no GPRS connectivity.

1x GSM LED

GSM LED indicates status of the mobile connection

1x LAN 10/100Mbps Ethernet port 1x LAN 10/100Mbps Ethernet port

Device can host a network up to one wired networking device. Ethernet port speed is 100 megabits per second.

1x LAN LED

LAN LED indicates the status of the wired connection

1x Micro-SIM card 1x Micro-SIM card

Allows to put 1 Micro-SIM card for internet connection

1x Power LED

Power LED indicates status of the power plug connection

1x RP-SMA for WiFi

Reverse-polarity SMA type antenna connector for WiFi

1x SIM Card 1x SIM Card

Allows to put 1 SIM card for internet connection

1x SMA for GPS

SMA type antenna connector for GPS

1x WAN 10/100Mbps Ethernet ports

WAN port is used to connect to an internet source. Ethernet port speed is 100 megabit per second.

1x bi-color connection status LED

Indicates status of the mobile connection

2 pin industrial DC power socket

Power connector with 2 pins (Power, Ground)

2x Fakra for LTE 2x Fakra for LTE

Two LTE antenna connectors based on FAKRA standart

2x LAN status LEDs

2x RP-SMA for WiFi

Reverse-polarity SMA type antenna connectors for WiFi

2x SIM Card (Dual-SIM) 2x SIM Card (Dual-SIM)

Allows to put 2 SIM cards (can be from different operators) for internet connection

2x SMA for 3G

SMA type antenna connector for 3G

2x SMA for LTE

SMA type antenna connector for Wi-Fi

2x connection status LED

30V, 250mA digital open collector output

Open collector (OC) output

36 - 57 VDC POE adapter 36 - 57 VDC POE adapter

PoE (power over ethernet) adapter which provides input voltage range 36-57 VDC via Ethernet cable

3x LAN 10/100Mbps Ethernet ports 3x LAN 10/100Mbps Ethernet ports

Device can host a network up to three wired networking devices. Ethernet ports speed is 100 megabits per second.

3x connection status LED

4 Pin power connector

Power connector with 4 pins (Power, Ground, Ignition, Reserved)

40V, 4A SPST relay output

Single Pole Single Throw (SPST) Relay output

4x LAN 10/100Mbps Ethernet ports 4x LAN 10/100Mbps Ethernet ports

4x LAN status LEDs

LAN LED indicates the status of the wired connection

5x connection strength LEDs

Connection LEDs indicates the mobile signal strenght on the device

6 - 30V 6 - 30V

External voltage range

AIN - analog input AIN - analog input

An analog input converts a voltage level into a digital value that can be stored and processed in device.

Accelerometer

Accelerometer allows the device to indicate if vehicle is moving or not, as well as measure acceleration.

Adjustable pole mounting kit

Mounting kit which allows device mount on the pole

Android Android

Battery Battery

Allows device to work without external power source

CAN J1708 CAN J1708

SAE J1708 is a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle

CAN J1939 CAN J1939

SAE J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components

Configurable buttons Configurable buttons

Allows to call or send alarm to configurable number.

DIN Rail mounting DIN Rail mounting

Mounting kit which allows device mount on metal rail.

DIN – digital input DIN – digital input

Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).

DOUT DOUT

Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).

Digital output

Dual-sim (1x SIM card; 1x eSIM)

Dual-SIM functionality is achieved with 1 regular SIM card and one SIM chip.

Durable aluminum housing

Device housing is made from aluminum material

External GNSS antenna External GNSS antenna

An antenna used for GPS connectivity. Connected to FM device via external connector.

External GSM antenna

An antenna used for GSM connectivity. Connected to FM device via external connector.

External WiMAX antenna

WiMAX antenna which connects to device via external connector

GNSS antenna type

I/O connector I/O connector

IEEE 802.11b/g/n WiFi standards

Standarts for WiFi technology: 802.11b - 11 Mbps standard, 2.4 GHz signaling; 802.11g - 54 Mbps standard, 2.4 GHz signaling; 802.11n - 100+ Mbps standard improvements over 802.11g

IEEE 802.16e-2005 IEEE 802.16e-2005

WiMAX technology standart.

IP31

Protected from tools and wires greater

IP41

Protected from tools and small wires, condensation.

IP54

Limited protection against dust ingress. (no harmful deposit), Protected against splash water from any direction.

IP65 IP65

Protected from total dust ingress, low pressure water jets from any direction.

IP67 IP67

Protected from total dust ingress, immersion between 15 centimeters and 1 meter in depth.

Input and Output Input and Output

Input for Ignition

Input voltage

Input voltage 5 VDC

Voltage by which device can be powered safely

Input voltage range

Input voltage range 11 - 14 VDC

Voltage range by which device can be powered safely

Input voltage range 7-30 VDC Input voltage range 7-30 VDC

Voltage range by which device can be powered safely

Input voltage range 8-30 VDC Input voltage range 8-30 VDC

Voltage range by which device can be powered safely

Input voltage range 9-30 VDC

Voltage range by which device can be powered safely

Internal 3G antenna

3G antenna is mounted in the device's hardware enclosure

Internal GNSS antenna Internal GNSS antenna

An antenna used for GPS connectivity. Integrated into FM device PCB. Does not have external connector.

Internal GSM antenna Internal GSM antenna

An antenna used for GSM connectivity. Integrated into FM device PCB. Does not have external connector.

Internal LTE antenna

4G antenna is mounted in the device's hardware enclosure

Internal WiFi Antena Internal WiFi Antena

WiFi antenna is mounted in the device's hardware enclosure

Internal WiMAX antenna

WiMAX antenna is mounted in the device's hardware enclosure

K-Line K-Line

Allows to get vehicle data from tachograph

K-Line (OBD II)

Allows reading vehicle data

LED indication

Link Status and Link Activity LED

Indicates the status and activity of the WiMAX connection link

Magnets mounting Magnets mounting

Lets to mount device on any iron surface and detects any unauthorized dismounting.

Micro SD Micro SD

Micro SD card slot for records storing when there is no GPRS connectivity.

Mobile antenna type

Mounting options

Mounting options – DIN Rail, Wall Mounting options – DIN Rail, Wall

OBD II Data OBD II Data

Allows reading CAN bus data from vehicle ECU

OBD II connector OBD II connector

Allows to connect the tracker to vehicle OBDII port

Operating temperature range

Operating temperature range -20º to 50º C

Temperature range in which device can operate effectively

Operating temperature range -40°C to 75° C Operating temperature range -40°C to 75° C

Temperature range in which device can operate effectively

Operating temperature range 0º to 45º C

Temperature range in which device can operate effectively

Operating temperature range 0º to 50º C

Temperature range in which device can operate effectively

Operating temperature range – -40 °C to 75 °C Operating temperature range – -40 °C to 75 °C

Outdoor casing Outdoor casing

Enclosure which lets keep device outside safely

Outdoor housing with heater and cooler Outdoor housing with heater and cooler

Enclosure which lets keep device outside safely. To keep device in safe temperature range heater and cooler is used.

Overvoltage protection

Protects device from voltage jumps till 90V

Power consumption

Power consumption < 2.5W

Amount of energy consumed by the device is less than 2.5 watts

Power consumption < 3.5W

Amount of energy consumed by the device is less than 3.5 watts

Power consumption < 5W

Amount of energy consumed by the device is less than 5 watts

Power consumption < 6W

Amount of energy consumed by the device is less than 6 watts

Power consumption < 7W

Amount of energy consumed by the device is less than 7 watts

Power consumption < 8W

Amount of energy consumed by the device is less than 8 watts

Power over Ethernet (not compliant with IEEE 802.3af - 2003) Power over Ethernet (not compliant with IEEE 802.3af - 2003)

Device can be powered over Ethernet port but it is not compliant with IEEE 802.3af-2003 standard. Powering device from IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of PoE standard.

Powering via USB

Provide power for the device via USB port.

RJ11

A Registered Jack (RJ) is a standardized telecommunication network interface for connecting voice and data equipment to a service provided

RJ4 (audio)

RS232 RS232

RS-232 is a standard for serial communication transmission of data

RS485 RS485

RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems

SIM card slots

Storage temperature range

Storage temperature range -20º to 60º C

Temperature range at which the device can be safely stored when it is not powered.

Storage temperature range -20º to 70º C

Temperature range at which the device can be safely stored when it is not powered.

Storage temperature range -45ºC to 80º C

Temperature range at which the device can be safely stored when it is not powered.

USB 2.0 Interface USB 2.0 Interface

Device accessible and configurable via USB

USB A socket for external devices

USB interface which can be used to connect external devices to the router

Vibrator

Vibration is one of notifications types. It informs about incoming call, received/sent SMS message or activated Alarm.

WLAN speed Up to 150 Mbps WLAN speed Up to 150 Mbps

WLAN speed Up to 300 Mbps WLAN speed Up to 300 Mbps

Wall mounting Wall mounting

Device panels have integrated flanges. With these panels router can be attached to various surfaces using screws or cable ties.

Waterproof RJ45 socket Waterproof RJ45 socket

RJ45 socket which can be used outdoor

WiFi antenna type WiFi antenna type

WiFi speed Up to 150 Mbps WiFi speed Up to 150 Mbps

WiFi provides wireless network communication over short distance. Interface speed up to 150 Mbps.

WiFi speed Up to 300 Mbps WiFi speed Up to 300 Mbps

WiFi provides wireless network communication over short distance. Interface speed up to 300 Mbps.

WiMAX Wave 2 Complian WiMAX Wave 2 Complian

Device is compliant with IEE802.16e-2005 WiMAX Wave 2

WiMAX antenna type

Windscreen mounting Windscreen mounting

Device can be mounted on the windscreen

eSIM

Embedded SIM is a chip provided by GSM operator, which can be soldered on device PCB instead of using standard SIM card.

Firmware features

ALL-CAN support ALL-CAN support

ALL-CAN300 is used to listen data from any type of transport: light vehicles, Trucks, busses, agriculture and other special transport. With this adapter FM device is able to collect and send such data.

Access control safety Access control safety

Access to the device can changed to different TCP port or be enabled/disabled.

Alarm button Alarm button

The alarm button functionality is responsible for event generating while Alarm button is pressed.

Auto Geofencing Auto Geofencing

Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Automatic and manual operator selection Automatic and manual operator selection

Device can select network operator automaticly and manually

Backup WAN Backup WAN

Backup WAN feature allows device to swtich to secondary internet source if primary one fails

Bluetooth sensors support

Bluetooth sensors are responsible to transmit the collected data remotely to device.

Bridge mode Bridge mode

Bridge mode lets end device to connect dirrectly to operator and receive IP address from it

CLI

CLI (command-line interface) allows user to use linux commands for router configuration

Call Utilities

Device can take action if it recieves a call. Actions: reboot, get status, turn Wi-Fi on/off, turn mobile data on/off, turn output on/off.

Configurable On Screen Display

Device video screen can be customized (GPS data and text overlay can be added to the video).

Configurable RTSP stream

Device video stream can be viewed with RTSP video player (e.g. VLC video player).

Configurable recording length

Video length can be configured

Configuration Profiles

Device can have several profiles with different configuration

Configuration backup

Configuration backup/restore

Device configuration can be saved to file and uploaded to same or other routers

Configuration over Bluetooth

Configuration over Bluetooth gives ability to configure the device remotely by using Bluetooth connection.

Connection status overview bar

All device information can be seen in one page (System information, network information, connection status, recent events)

Crash detection Crash detection

Crash detection functionality is generating the record when device detects car accident using the internal sensors (Accelerometer).

DDD download and Tacho online data DDD download and Tacho online data

Tachograph data download helps User to gather tachograph information remotely. The tachograph data is directly transmitted to the fleet management device via k-line connection

DHCP server DHCP server

The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to assign IP addresses and provide configuration information to devices such as servers, desktops, or mobile devices, so they can communicate on a network using the Internet Protocol (IP)

Disable Roaming

Device can be configured to not use mobile data while its in roaming

Dynamic DNS Dynamic DNS

Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to static hostname.

Eco driving Eco driving

This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable. FM device Digital Output 1 is controlled by scenario for user needs, buzzer or LED for example.

Embedded web server for live video and configuration

Device has embedded web server, from which live video stream could be seen. Device could also be configured from web server

Event logging

Device can log events, e.g.: leassed IP addresses, connections, system events, SMS messages

Event reporting (via Email/SMS)

Device can send email or SMS if configured event happened

FOTA

Firmware over the air solution. The software is used to send firmware/configuration to FM device via GPRS network.

FOTA (Firmware Over The Air)

Firmware over the air solution. Device firmware can be updated from server.

Firewall Firewall

Device has configurable firewall (Port forwarding, traffic rules)

Firmware and configuration updates Firmware and configuration updates

Framerate control

Device video frame rate can be changed. Frame rate control (FRC) is a method for achieving higher color quality in low color resolution display panels

Fuel counter

Helps to monitor the fuel flow in the vehicle and transmit the dedicated data to the server.

Fuel monitoring CAN FMS

The FMS CAN line gives ability to read the vehicle fuel level parameters. This functionality works with J1939 or J1708 communication standards.

Fuel monitoring LLS Fuel monitoring LLS

Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.

GNSS unplug detection

The GNSS unplug detection gives an ability to notify the User about GNSS antenna disassembly.

GPRS commands GPRS commands

It is possible to send commands to FM device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.

GRE Tunnel

GRE (Generic Routing Encapsulation RFC2784) is a solution for tunneling RFC1812 private address-space traffic over an intermediate TCP/IP network such as the Internet. GRE tunneling does not use encryption it simply encapsulates data and sends it over the WAN.

Garmin

Garmin provides a Fleet Management Interface Tool Kit, which connected to FM device via RS232 interface enables the driver to have a in their vehicle for real-time navigation, messaging, and job dispatch capabilities to help them be more efficient.

Geo-fence Geo-fence

A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas

Green driving

Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.

IP/MAC filter

Device can block devices with certain MAC addresses or allow connect only those devices, which MAC addresses are in the MAC list

IPsec

The IPsec protocol client enables the router to establish a secure connection to an IPsec peer via the Internet

Idling detection Idling detection

The Idling detection functionality allows User to monitor the engine working time without initial speed.

Ignition detection Ignition detection

A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).

Immobilizer Immobilizer

With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. FM device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).

Integrated scenarios Integrated scenarios

The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.

Integrated speed test

Device has integrated speed test functionality

Jamming detection Jamming detection

Jamming detection informs the driver with buzzer or LED about radio jamming events.

L2TP

In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services by ISPs. It does not provide any encryption or confidentiality by itself.

LV-CAN support LV-CAN support

LV-CAN200 is used to listen data from light vehicles. With this adapter FM device is able to collect and send such data.

Live view Live view

Device can display life video footage

Man-down Man-down

This function activates monitoring of device position. If position is changed, device activates PreAlarm which is representing that device is changed the position.

MicroSD card slot (cards up to 32GB are supported) MicroSD card slot (cards up to 32GB are supported)

Device has microSD card slot

Microphone

Device has microphone

Mobile Data Limit

Device can stop providing internet access if mobile data limit is reached.

Mobile Traffic counter

Device can display mobile traffic usage information

Mobile enable/disable via SMS

Device's mobile connection (3G/4G) can be enabled or disabled via SMS message

Mobile on Demand

Device can disconnect it's data connection after specified amount of time of inactivity. (Only use data when it is needed)

Motion detection

Device can sense motion and take appropriate action, e.g. start video recording.

NITZ time synch.

Network Identity and Time Zone (NITZ) is a mechanism for provisioning local time and date, time zone and DST offset, as well as network provider identity information, to mobile devices via a wireless network.

NTP

Device internal clock can be sinchronized via internet with NTP (Network Time Protocol)

NTP time synch. NTP time synch.

Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.

Network Scanner with Topology display

Device can scan network topology (both LAN and WAN) and display it graphically

OSPF

Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior routing protocols, operating within a single autonomous system (AS).

Odometer

Odometer is used to calculate traveled distance and produce this information directly to server.

Offline tracking

Offline tracking is used to track the object position while GPRS is not activated.

OpenVPN OpenVPN

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange.

OpenVPN enable/disable via SMS

Device's OpenVPN can be turned on or off via SMS message

Overspeeding detection

This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.

PPPoE

Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the internet through a common broadband medium, such as DSL line, wireless device or cable modem.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a protocol (set of communication rules) that allows corporations to extend their own corporate network through private over the public Internet.

Periodic reboot Periodic reboot

Device can be configured to restart periodically

Ping reboot Ping reboot

Device can take appropriate action if it cannot ping specific IP address

Playback from SD card

Device can play video from SD card

Powered via Ethernet cable

Device can be powered over Ethernet port but it is not compliant with IEEE 802.3af-2003 standard. Powering device from IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of PoE standard.

Private/business trip Private/business trip

When Trip Event Private/Business enabled, possible trip values are sending to server with different identification number. The special radio frequency remote controller can be used to identify the different types of trip.

Profiles Profiles

Profiles configuration system gives an ability to configure the device with different behaviors. For example the device can change the profiles during the different operator code, engine working state or etc.

QoS

Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications, online gaming, Ethernet LAN ports, or specified MAC addresses to minimize the impact of busy bandwidth

RFID 1-Wire® RFID 1-Wire®

Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via 1-wire interface.

RFID RS232 RFID RS232

Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via RS232 interface.

RMS support RMS support

Device supports Teltonika's RMS (Remote Mangement System)

Real-time graphs Real-time graphs

Device can display realtime graphs, e.g. signal strength, connection count

Record on schedule

Device can record video on schedule

Recording to MicroSD card Recording to MicroSD card

Device can record video footage to microSD card

Remote Log Remote Log

This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.

Remote configuration over SMS

The remote configuration via SMS gives an ability to configure the device via SMS

Resolution control Resolution control

Device video resolution can be changed.

Restore Point

Device's firmware and configuration can be downloaded as a single file and latter uploaded to router to restore both its previous firmware version and configuration

SIM Idle protection

Device can periodically switch to secondary SIM card to prevent operator from disabling SIM card

SIM switch SIM switch

Device can switch active SIM automaticly if certain event occurs (Events: On weak signal, On data limit, On sms limit, On roaming, No network, On network denied, On data connection fail)

SMS event SMS event

SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.

SMS gateway

Device has: HTTP Post/Get, Email to SMS, Scheduled SMS, SMS Forwarding and SMPP functionalities

SMS reboot

Device can be restarted via SMS

SMS tracking

SMS tracking gives ability to monitor device location via SMS. The User is able to receive location in the coordinates or Google Maps link.

SNMP

Simple Network Management Protocol - a set of protocols for managing complex networks. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network.

SNMP Trap

Asynchronous notification from agent to manager. SNMP traps enable an agent to notify the management station of significant events by way of an unsolicited SNMP message

Send/receive SMS

Device can send and receive SMS messages

Silent call

The silent call functionality is dedicated to make a voice call that nobody will be able to notice

Sleep mode (no deep sleep)

While device is in the sleep mode it turns GNSS module off and it is not making new periodic records. This functionality will save energy consumptions while device is the stop mode.

Sleep/Deep sleep

Working modes which let FM device to reduce power consumption and save vehicle battery. - In sleep mode, FM device turns GNSS module off and it is not saving or sending new periodic data records. - In deep sleep mode, FM device sets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.

Static routes

Static routes can be configured on device

Status via SMS

Device status information can be received from device via SMS message

TR-069 TR-069

TR-069 (Technical Report 069) is a technical specification that defines an application layer protocol for remote management of end-user devices

TachoWeb synch.

TachoWeb is an online platform which allows the User to download the DDD files. The special synchronization process can be used to adopt devices to the existing system.

Temp. 1-Wire®

A temperature sensor which can be connected to FM device and provide information via 1-wire data protocol.

Towing detection Towing detection

Towing detection feature helps to inform the User about car deporting. The quick event will be sent to server while towing is detected.

Transparent mode (RS232) Transparent mode (RS232)

The RS232 is a standard used for a serial communication between devices. While using RS232 connection various type of data like fuel parameters or messages can be transmitted.

Trip detection Trip detection

Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.

Upload video to FTP

Device can upload short videos (up to 5 seconds) to FTP

VLAN VLAN

A virtual LAN (VLAN 802.1Q) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2)

VRRP

Virtual Router Redundancy Protocol - an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address.

Video/Alarm In/Alarm Out/Power via single Ethernet cable

All device's inputs and outputs can be connected via single Ethernet cable. (I.E. device can: be Powered from Ethernet cable, provide video footage via Ethernet cable, have dedicated Ethernet cable pins for input and output at the same time)

Voice call Voice call

The voice call functionality gives an ability to make a directly phone call with device.

Web Filter

Device can block specific host names or only allow users to access host names from the white list.

Wireless AP Wireless AP

Device can work as a wireless access point

Wireless Client

Device can connect to another Access Point as a client (Wi-Fi WAN)

Wireless Hotspot Wireless Hotspot

Device has Wireless Hotspot. Wireless hotspot is more advanced version of Wireless Access Point with more customizability

Wireless enable/disable via SMS

Wireless device adapter can be controlled remotely via SMS

iButton 1-Wire®

iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with FM devices

iButton Notification

iButton Notification informs driver, that his iButton or 1-wire RFID card was scanned and stored.